Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Issaquah, WA | Lodestar Locksmith
We provide independent Medeco service across Issaquah, from the Highlands plateau in 98029 down to the older valley homes in 98027, with Klahanie Medeco service available nearby as well. What makes our Medeco work here different is simple: we know which side of Issaquah your hardware came from and how the local climate treats it. If you need a Medeco lock rekeyed, repaired, or fitted, call (855) 382-0943 for a straight answer and a free estimate. Every Medeco job we touch uses genuine pins, sidebars, and restricted blanks unless the honest call is a quality aftermarket cylinder.
Why Issaquah Residents Choose Us for Medeco Service
Medeco is not a brand most locksmiths stock parts for. It’s a restricted-keyway system, which means the blanks are controlled and the pinning kits are not something you pick up at a supply counter. Our crew carries the pull charts, pinning kits, and restricted keyway blanks for Maxum, KeyMark, and Classic cylinders, and we handle key-control records directly instead of pushing you through a manufacturer program. Norm Eckley, our owner, spent the better part of two decades on high-security commercial hardware across Pierce County before bringing that same discipline to Issaquah’s mix of plateau condos and valley-era houses, and now Medeco in East Renton Highlands as well. We show up already knowing which Medeco cylinders are commonly installed in a Highlands townhome versus a 1920s downtown mortise lock, which saves you the cost of us figuring it out on your dime. When a Medeco job turns into a door-frame situation, we handle the frame too. One call covers the lock, the key, and the repair.
Styles & brands we work with







Common Medeco Locksmith Problems We Solve in Issaquah
- Corrosion-frozen exterior deadbolts. Issaquah’s wet winters and the occasional ice event put a lot of moisture into exterior locksets. The Medeco sidebar and plug can seize up enough that the key inserts but won’t turn. We disassemble, clean, lubricate, and re-pin when needed instead of selling you a new lock you don’t need.
- Misaligned deadbolts from swollen doors. The damp months make wooden doors swell, especially on older valley homes in 98027. The Medeco deadbolt stops lining up with its strike plate and the bolt won’t throw. We re-align the strike, trim the jamb when the door’s shifted too far, and get the lock working without forcing anything.
- Restricted-keyway key control breaks after a turnover. This happens constantly in Issaquah Highlands when a condo or townhome changes hands. The previous owner still holds an M3 or M4 restricted key, or you’ve inherited a Medeco cylinder with no key-control card. We re-pin the cylinder to a fresh restricted keyway, record it under your name, and that closes the old key out.
- Worn pins and gritty key travel from repeated rekeying. The spring and summer move-in wave in 98029 means a lot of Medeco cylinders get rekeyed over and over, year after year. Pins wear, springs soften, and the key starts to feel sticky and rough. A full re-pin with genuine Medeco pins restores that crisp, solid turn.
- Retrofitting Medeco onto original mortise locks. Older downtown Issaquah homes often still run the original mortise lockset from the 1920s or earlier. Putting a Medeco cylinder into that setup means reworking the mortise pocket, the backset, and the strike cut before the cylinder even goes in. We do the carpentry side of it, not just the cylinder swap.
Medeco Service in Issaquah: What Local Conditions Mean for Your Equipment
Issaquah’s Medeco footprint splits cleanly by elevation and era, and that split dictates the first move on almost every job. The Highlands plateau in 98029 carries modern builder-grade doors prepped for standard deadbolts, so a Medeco Maxum or KeyMark swap usually drops in with minimal fitting, unlike Medeco in Mirrormont where older builds are more common. But down in the 98027 valley, where early-1900s and mid-century houses still run original mortise locksets, a Medeco retrofit is a carpentry job before it’s a cylinder job. We’re cutting the mortise pocket, adjusting the backset, and re-cutting the strike plate on an old fir door that’s been painted shut six times since the Eisenhower administration. A homeowner in the Issaquah Highlands called us this spring after a move-in because her Medeco Maxum turned hard and the key felt gritty, and she had no key-control card from the previous owner. We pulled the cylinder, found worn pins and a dry sidebar, re-pinned it to a fresh restricted keyway under her name, lubricated the plug, and adjusted the strike so the swollen wet-season door threw cleanly. That’s the difference between treating Medeco as a brand and treating it as a system that has to fit an actual door in an actual climate.
Medeco Models & Products We Service in Issaquah
We work on Medeco Maxum deadbolts for residential high-security, KeyMark and KeyMark XT cylinders for commercial and condo applications, the original Medeco Classic mortise and rim cylinders that still show up in older Issaquah buildings, and M3/M4 restricted keyway systems. On parts, we use genuine Medeco pins, springs, sidebars, and restricted blanks whenever the cylinder is a true Medeco system. When a cylinder is obsolete or the part chase doesn’t make sense, we say so plainly and recommend a quality aftermarket cylinder that fits the door and the budget. We keep the most common Medeco pinning kits and restricted blanks ready for fast Issaquah turnaround, and we never pad a job by replacing a rebuildable sidebar or plug.
Medeco Service Pricing in Issaquah
Medeco service in Issaquah runs on a few variables: whether we’re rekeying an existing cylinder, rebuilding one that’s corroded or worn, retrofitting a mortise pocket in an older door, or installing a fresh Maxum or KeyMark setup. A straightforward rekey on a Highlands townhome lands lower than a full mortise retrofit on a 1920s downtown door, and we’ll tell you which camp you’re in before any work starts, whether that’s Issaquah proper or Medeco repair in City of Sammamish. The estimate covers the diagnostic, the labor, and the parts, quoted as a flat number on the phone before anyone is dispatched. The price we quote is the price on your invoice. Call (855) 382-0943 and tells us what’s on your door, we’ll give you the real number for Issaquah specifically.
Serving Issaquah, WA — Our Local Coverage Area
We’re based in the Issaquah area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Issaquah
Yes. We re-pin the cylinder to a fresh restricted keyway, record the new key number under your name, and the previous owner’s keys stop working. No key-control card needed from the prior occupant. Call (855) 382-0943 and we’ll get a new key in your hand the same day.
It can, but it’s a retrofit. The mortise pocket, backset, and strike cut need to be modified for the Medeco cylinder to sit correctly and throw cleanly. We handle that carpentry work as part of the install. It’s not a five-minute swap on an original door like that.
Issaquah’s winter rain and occasional ice drives moisture into exterior hardware. The sidebar and plug inside the Medeco cylinder can corrode or gum up, and the wooden door itself swells, pulling the deadbolt out of line with the strike. We disassemble and lubricate the cylinder, re-align the strike, and trim the jamb if the door’s shifted. It usually fixes the sticking for good.
Yes, that’s the whole point of a restricted keyway system. We pin each cylinder to the same key number, record it under one owner, and issue only the keys you authorize. Hardware stores can’t copy a restricted blank without your signed authorization, which is exactly what you want. Call (855) 382-0943 for a flat per-lock price on the whole setup.
If a hardware store actually copied it, the cylinder wasn’t running a truly restricted keyway, or someone signed off on the blank. Either way, the fix is the same: re-pin the cylinder to a fresh restricted keyway we record under your name, issue new keys, and the old copies become useless. We’ll assess exactly what you’ve got and tell you the straight version. Call (855) 382-0943 for a free estimate.
Service Areas Near Issaquah
Our crews run Medeco service throughout the I-90 corridor and surrounding communities. We cover Issaquah Highlands and downtown Issaquah, plus the Eastside corridor through Medeco service in Bellevue and the Eastside waterfront communities including Medeco service in Medina. Tacoma and its nearby neighborhoods, including Browns Point, Fircrest, and Fife, round out the southern reach. If you’re on the fence about whether we cover your address, call and ask.
Need a Medeco specialist who understands Issaquah’s split between plateau hardware and valley mortise work? We carry the genuine parts, the key-control records, and the carpentry skills to handle both. Call (855) 382-0943 for a free estimate. Same-day service is available for most Issaquah rekeys and lockout work. Our full Medeco range lives on the Medeco sales & service page, and our broader reach is on the Issaquah service area page.
Book Your Medeco Service in Issaquah Today
Call (855) 382-0943 now for a free, flat estimate on Medeco repair, rekey, or installation anywhere in Issaquah. Same-day service is available for most jobs. The right fix the first time, because a second lockout call is one too many.
Written by Norm Eckley, Owner at Lodestar Locksmith, serving Issaquah since day one.