Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Tacoma, WA | Lodestar Locksmith
We provide independent Schlage locksmith service across Tacoma, from B60 deadbolts on Craftsman front doors to BE-series smart locks on newer builds, including Car Key Replacement in Tacoma. What sets our Schlage work apart here is that we routinely repair the specific mess Tacoma’s older housing stock creates: original mortise locks sabotaged by cheap cylindrical deadbolts drilled through the door stile. Call (855) 382-0943 and we’ll tell you over the phone whether it’s a repair or a replacement, along with a firm price.
Why Tacoma Residents Choose Us for Schlage Service
Norm Eckley, our owner, grew up in Tacoma’s Hilltop neighborhood, where half the deadbolts on his block hadn’t worked right since the Carter administration. That stuck with him. After Clover Park Technical College and nearly two decades turning wrenches on Schlage, Medeco, and everything between across Pierce County, he built Lodestar around one idea: work in the brands you researched, and fix the lock that’s actually on your door rather than selling you the one that happens to be in the van. We’re an independent shop, not a Schlage-authorized dealer, which means we diagnose honestly: repair when the body is sound, replace when it’s cracked. We also carry OEM Schlage cylinders, tailpieces, and strike plates for fast same-day turnaround in Tacoma. Our Schlage sales & service work spans eight lock brands because your front door doesn’t care what label is on the box.
Styles & brands we work with
Common Schlage Locksmith Problems We Solve in Tacoma
- B60/B62 deadbolt cylinders seizing and corroding. Tacoma’s marine air pushes moisture into west- and north-facing exterior doors from October through April. Schlage B-series cylinders are solid hardware, but the pins and springs inside will bind when salt-laden damp gets past a worn weatherstrip. We strip, clean, and re-lubricate the cylinder with a dry film lubricant, then rekey it so the key stops sticking.
- BE365 and BE469 smart deadbolts draining batteries or going unresponsive. The BE-series keypad and battery compartment sit on the exterior side of the door, and Tacoma’s fall-through-spring damp finds its way in. When the door itself swells, the bolt binds against the strike plate and the motor works twice as hard, killing batteries in weeks instead of months. We resolve the door alignment first, then seal the battery compartment properly.
- Original Schlage mortise locks with drilled-through stiles. This one’s Tacoma-specific. On North End and Stadium District Craftsman and Victorian front doors, a previous owner often drilled a cylindrical deadbolt straight through the door stile above the original mortise lock. The wood splits, the bolt won’t throw, and the mortise body stops working altogether. We repair the stile, re-fit the mortise body, and rekey the deadbolt so one key works both.
- F51/F58 knob and lever chassis wear on rental doors. Near UPS and downtown Tacoma, rental turnover is constant, and landlords rekey between tenants. F-series knobs and levers on high-traffic entry doors develop loose rose plates and sloppy keyways. The latch stops throwing cleanly and the key feels like it’s turning in gravel. We replace the chassis and tighten the rose assembly, then rekey to the new tenant’s key.
- ND-Series commercial cylindrical locks on storefronts and offices. Tacoma’s working port and industrial properties use Schlage ND hardware that sees heavy daily use. Worn levers, failing latch retractors, and key cylinders that need re-pinning to new hires are common. We service the ND line with OEM parts and can set up a master key system that fits the building’s existing hardware.
Schlage Service in Tacoma: What Local Conditions Mean for Your Equipment
Here’s the thing about Tacoma that most Tacoma Emergency Locksmith pages won’t tell you: the city’s North End and Stadium District hold a dense concentration of century-old Craftsman and Victorian front doors whose original mortise locks were “upgraded” by past owners with cheap cylindrical deadbolts drilled straight through the door stile. We see it weekly. A homeowner in the Stadium District called us about a Craftsman front door where a prior owner had drilled a Schlage B60 above the original mortise lock, and the wood had split so the bolt wouldn’t throw. Our tech pulled the cylinder, reinforced and repaired the stile, re-fit the original mortise body with an OEM tailpiece, and rekeyed the B60 so the homeowner had one key for both. The door latched cleanly and the 100-year-old mortise lock stayed in service instead of getting ripped out. That’s the difference between a locksmith who knows Tacoma’s housing stock and one who only knows how to swap a deadbolt. Big-box shops will sell you a whole new lockset and drill another hole. We fix what’s there.
Schlage Models & Products We Service in Tacoma
We service the full Schlage range you’re likely to find on Tacoma doors: B60 and B62 single-cylinder deadbolts, the F-Series knob and lever lines (F51, F58), BE365 and BE469 Encode and Sense smart deadbolts, and commercial ND-Series cylindrical locks. For parts, we fit genuine Schlage OEM cylinders, tailpieces, and strike plates where they’re still available. For discontinued mortise and vintage hardware, we use quality aftermarket equivalents that match the original spec. We stock common Schlage pin kits, cylinders, and strike plates locally, which means most Tacoma service calls are completed in one trip. Smart lock installation is a specialty of ours, especially on older doors that need fitting work before the lock goes on.
Schlage Service Pricing in Tacoma
Here’s what you can expect for Schlage work in Tacoma. A standard Schlage deadbolt or knob rekey runs $25 to $45 per cylinder, including labor and new pins. Lock changes with new Schlage hardware typically run $95 to $250 per door, depending on the model and whether we need to bore or repair the door. Smart lock installation runs $75 to $150 in labor, plus the cost of the lock itself if we supply it. Schlage B60 deadbolts themselves run $35 to $75 for hardware at most Tacoma suppliers, while F-series knobs and levers run $45 to $100. Repair work on original mortise locks is quoted after inspection, but we’ll give you a firm number before any work starts. The full price is quoted on the phone before we dispatch anyone, and that’s the price on your invoice. No call-out surcharge added when we arrive. Call (855) 382-0943 for a free estimate on any Schlage lock issue in Tacoma.
Key Takeaways
- Independent Schlage service across Tacoma, not an authorized dealer – we diagnose honestly and repair when possible.
- We handle the Tacoma-specific problem of vintage mortise locks drilled through by cheap cylindrical deadbolts.
- OEM Schlage parts stocked locally for same-day service on most calls in Tacoma.
- Firm phone quotes with no surprise charges on arrival.
- Full service range: rekey, lock change, and smart lock installation on Schlage hardware.
Serving Tacoma, WA — Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Tacoma
Yes, we rekey Schlage deadbolts on original Craftsman doors in Tacoma every week, as long as the cylinder and lock body are sound. If a prior owner drilled through the stile and split the wood, we repair that first, then rekey the cylinder so one key works the whole door. Call (855) 382-0943 and describe what you’re seeing; we’ll tell you if it’s a rekey or a stile repair.
In Tacoma, the usual cause is marine moisture getting into the BE-series battery compartment, combined with a swollen wood door that binds the bolt and makes the motor strain. We realign the door so the bolt throws freely, then seal the compartment against the damp. That typically fixes both the battery drain and the unresponsive keypad. Call (855) 382-0943 if your smart lock is acting up and we’ll sort it out.
Yes. Original Schlage mortise bodies on North End and Stadium District Craftsman and Victorian front doors are something we repair, not replace, whenever the case and bolt are sound, as part of our Schlage service in Fife and surrounding areas. If a cylindrical deadbolt was drilled through the stile above the mortise, we fix that too and rekey everything to one key. We’ve kept hundreds of 100-year-old mortise locks in service across Tacoma.
Yes, we set up master key systems on Schlage F-series and ND-series hardware for landlords near UPS and downtown Tacoma. Each tenant gets a key that only opens their unit, and you get a master that opens everything. We pin the cylinders on-site, so there’s no need to replace the hardware. Call (855) 382-0943 for a master key quote on your Tacoma rental.
On an older Tacoma door, smart lock installation usually means correcting the door alignment and strike plate first, because a binding bolt will kill batteries and strain the motor. Then we mortise the door for the new Schlage deadbolt, mount the keypad or touchscreen on the exterior, and pair it with your phone if it’s a BE469 Encode. Total labor time is usually under two hours. Call (855) 382-0943 and we’ll assess your specific door before you buy the lock.
Service Areas Near Tacoma
We serve the full Tacoma service area, including the neighborhoods that keep us busiest: the North End, Stadium District, Hilltop, and South Tacoma. Outside city limits, we take Schlage service calls in Schlage service in Browns Point, Schlage service in Fircrest, Fife, Fife Heights, and Waller. If you’re within 20 minutes of the Tacoma Dome, we’ll come to you.
Book Your Schlage Service in Tacoma Today
If your Schlage deadbolt is sticking, your smart lock’s eating batteries, or you’ve got a vintage mortise lock that needs real attention, our Waller Schlage service team is ready—call (855) 382-0943 now. We’ll give you a free estimate over the phone and, in most Tacoma neighborhoods, we can be at your door the same day. The right fix the first time, because a second lockout call is one too many.
Written by Norm Eckley, Owner at Lodestar Locksmith, serving Tacoma since his Hilltop days and keeping Pierce County’s Schlage hardware working ever since.